Barn Equipment

PUMPS & AGITATORS

Piston-Style Pumps – Efficiently move manure to storage using minimal power.

Vertical Pit Pumps – Agitate FAST, Transfer FAST, Load Fast.

Liquid Transfer System – Easy installation, low investment, low maintenance.

Vertical Electric Prop Agitator – High-Performance Prop Agitator for a Consistent Blend. Available in a variety of lengths from 6 to 16 feet (1.8 to 4.8 m).

Sydex Progressive Cavity Pumps – Control flow for each Patz SEPCOM™ Separator being fed by using a VFD drive to control the speed of the pump.

LEARN MORE

Hydraulic Manure Pumps

Model 720, Model 620, Model 520

The Model 720 Cement in Pitless Pump is great for areas where there is a high ground water table, or where a pump pit would be an inconvenience. A depth of 72″ below gutter is all the distance needed to install this pump. A large 40×40 hopper opening accepts most barn cleaners, and with a little extra cement work can be an ideal hole for scraping into from a free-stall barn. Reliable magnetic switches threaded directly into the hydraulic cylinder are water proof and provide years of trouble free service. The plunger can be adjusted to compensates for wear, and the wedge shaped design agitates manure to help reduce bridging of heavily bedded manure. 1/4″ AR400 abrasion resistant steel is used on the chamber sides and replaceable top where the most wear occurs, giving You up to 4 times the life of that of mild steel. 10″ pipe is standard, but 6, 8, and 12″ are also available to fit existing pipes for Your replacement needs.

The Model 620 Pump is our Slant Design reception pit manure pump. Requiring only 62″ below gutter, this pump will fit in many existing reception pits. The advantage of Slant Design is manure flows into the chamber more rapidly, increasing efficiency. The plunger can be adjusted to compensates for wear, and the wedge shaped design agitates manure to help reduce bridging of heavily bedded manure. 1/4″ AR400 abrasion resistant steel is used on the chamber sides and replaceable top where the most wear occurs, giving You up to 4 times the life of that of mild steel. Reliable magnetic switches threaded directly into the hydraulic cylinder are water proof and provide years of trouble free service. 10″ pipe is standard, but 6, 8, and 12″ are also available. With all the advantages of the Zabel Equipment Model 620 Manure Pump, it is a popular unit for replacing old worn-out pumps, or even in new construction.

The Model 520 Pump is our Flat Design reception pit manure pump. Requiring only 52″ below gutter, this pump will fit in most existing reception pits. The plunger can be adjusted to compensates for wear, and the wedge shaped design agitates manure to help reduce bridging of heavily bedded manure. 1/4″ AR400 abrasion resistant steel is used on the chamber sides and replaceable top where the most wear occurs, giving You up to 4 times the life of that of mild steel. Reliable magnetic switches threaded directly into the hydraulic cylinder are water proof and provide years of trouble free service. 10″ pipe is standard, but 6, 8, and 12″ are also available. Oversized hoppers are also a popular option on the Model 520. The Zabel Equipment Model 520 Manure Pump, it is an ideal unit for replacing old worn-out pumps.

LEARN MORE